59599aa美高梅-首页

Fumei New Materials

Mutual Benefit

Contact Us

Add: University Road, Jinbei Street, Lin'an City, Zhejiang Province, China
Contact Person: Yu Honggui
Mobile: +86-15336899576
Tel: +86-571-61076257
Fax: +86-571-61076257

Products

Organobentonite

Quality index:
Appearance: light-colored flowing powder
Volatile matter (105°C ,2 hours): ≤3.5%
Particle size (<76μm or 200 mesh): ≥95%
Viscosity (7% xylene glue at 25℃): ≥2.5 Pa.s
Scraper fineness (without grinding): ≤60μm
Loss on ignition (850-900℃): ≤40%


Features and uses:
Good thickening performance and anti-settling and anti-saggging properties. The product is white, its gel is colorless or light-colored. It can increase anti-yellowing performance.


Applications:
Paint, ink, cosmetics, sealant, grease, bronzing, nanocomposites, rubber, pesticide, medicine, oil drilling, etc.


Packing and storage:
Kraft paper bag outside, polythene film bag inside, or valve sack, weight is 25±0.25kg or at the request of clients. Keep in dry warehouse. Shelf life is 24 months at temperature of 0℃~30℃.



FM-630 Oil Well Cement Fluid-Loss Additive

FM-630 Oil Well Cement Fluid-Loss Additive
DESCRIPTION
FM-630 is made from synthetic polymer technology and available as a powder or a 20%
solution. It is a very effective fluid loss control agent that is a low to high range
temperature fluid loss control additive for use in oilwell cement slurries. FM-630 is
compatible with all classes of cement and a wide variety of typical additives making it a
very versatile product.
APPLICATION
FM-630 can slightly retard and disperse cement. Consequently, slurry rheology is lowered,
helping eliminate the need for friction reducers that will save money.
It is environmentally safe and is available as a dry powder that can be used for bulk
blending with cement and admixtures.
FM-630 additive can help control fluid losses in seawater slurries, salt-saturated slurries,
and slurries containing 5% KCl or 2% CaCl2.
FM-630 can be used with special formulations such as lightweight and heavyweight
cement blends.
FM-630 cement fluid loss additive is designed for use in wells with bottomhole circulating
temperatures (BHCTs) in the 60°F(15.6°C) to 400°F(204°C).
FM-630 provides API fluid loss control below 36cc/30min while controlling gas migration
from the formation. Generally 0.6% to 2.0%BWOC is requierd in most slurries. It is usually
used at a dosage of less than 0.8%BWOC.
Benefits of using FM-630 Fluid-Loss Additive include:
Help reduce horsepower requirements by controlling fluid viscosities and circulating
pressures.
 Help maintain slurry density.
 Help control gas migration.
 Help protect water sensitive formations.
 Help secure a better cement/casing bond.
 Easier mix water or dry blended with the cement.
PHYSICAL PROPERTIES
Appearance Off-white Powder
Bulk Density (g/100cm3 ) 50 to 70
pH of 5% solution@20 8 to 10
PACKAGING
The product is packaged in 25kg sacks.
ADDITIONAL INFORMATION
FM-630 is classified as non-hazardous for transport purposes.


FM-320 Oil Well Cement Friction Reducer

FM-320 Oil Well Cement Friction Reducer
DESCRIPTION
FM-320 is a highly effective dispersant for oil well cement slurries. It is a free flowing
powder which is produced by the spray drying of a chemically modified alkyl sulphonate.
APPLICATION
FM-320 helps reduce apparent viscosity and can improve the rheological properties of a
cement slurry. It is environmentally safe and is available as a dry powder that can be used
for bulk blending with cement and admixtures.
FM-320 enhances fluid loss control with most fluid loss additives. It can slightly retard
cement.
FM-320 can be used with saturated salt, CaCl2, and seawater. It was designed for a wide
range of cement slurry compositions prepared with API cements.
FM-320 can be used with special formulations such as lightweight and heavyweight
cement blends.
FM-320 cement friction reducer is designed for use in wells with bottomhole circulating
temperatures (BHCTs) in the 60°F(15.6°C) to 300°F(148.9°C).
FM-320 can be effective at concentrations as low as 0.2%BWOC.Generally 0.3% to
0.8%BWOC is required in most slurries containing fluid loss additives.
Benefits of using FM-320 dispersant include:
 Easier mixing.
 Lower friction pressure during pumping.
 Improved turbulent flow at reduced pumping rates.
 Ability to mix densified cement slurries.
PHYSICAL PROPERTIES
 Appearance Red-brown Powder
 Bulk Density (g/100cm3 ) 40 to 60
 pH of 1% solution@20 8.0 to 10
PACKAGING
The product is packaged in 25kg sacks.
ADDITIONAL INFORMATION
FM-320 is classified as non-hazardous for transport purposes.


Home  /   About Us  /   News  /   Products  /   Job  /   Order  /   Contact Us
Copyright(C)2017,Hangzhou Fumei New Materials Co., Ltd. All Rights Reserved. Supported by ChemNet ChinaChemNet Toocle Copyright Notice